HVAC mold removal in Tyrone means fixing the water problem in the system, cleaning the coil, pan and sheet metal ducts, and replacing fiberglass duct board or lined duct that has grown mold. EPA says not to run a system you suspect is contaminated. Call the number on this page to be connected with a local mold remediation company in Tyrone.

Why did mold show up in my Tyrone home's AC?
Tyrone sits about 22 miles from Atlanta, with Line Creek forming its western boundary with Coweta County and Georgia 74 running through. Homes here generally rely on central air, and the ducts typically run through an attic or crawl space. In summer, the coil pulls water out of the air constantly. If the pan holds water, the condensate line clogs, or a supply duct sweats in a muggy crawl space, that moisture never leaves, and mold grows on the coil, the pan or the duct insulation. Larger homes with two systems double the number of places to check. A second-floor unit in the attic and a first-floor unit in the crawl space each have their own pan, drain and duct runs, and one can be fine while the other is the source.
Will the company clean my ducts or replace them?
That depends on what they are made of and how far the growth goes. EPA's duct cleaning guidance says cleaning may be worth considering for substantial visible mold inside hard sheet metal ducts. For fiberglass duct board or ducts lined with fiberglass, EPA says wet or moldy material cannot be effectively cleaned and should be removed and replaced. Flex duct with soaked insulation is usually replaced as well. Whatever the plan, it should start with the moisture source; cleaning alone does not keep mold from returning.
Do I need a permit, and who do I call?
The Town of Tyrone Building Department, part of Community Development and operated with SAFEbuilt, issues residential and commercial building, HVAC, electrical and plumbing permits. Replacing an air handler or significant duct runs will likely need an HVAC permit, so ask the contractor to pull it. If you rent and a leak has not been fixed, Tyrone Code Enforcement takes reports through an online Report A Code Enforcement Violation form; give the landlord written notice first and keep a copy.

A local note
Angi's Atlanta cost guide reports HVAC system mold remediation at $3,522 to $11,740, and HomeGuide's 2026 national range for HVAC systems or ducts is $2,000 to $10,000. Georgia has no state mold license; for health questions, Fayette County is served by the Georgia DPH District 4 health office in LaGrange.
HVAC & Air Duct Mold Removal questions in Tyrone
Is a permit needed to replace ductwork or an air handler?
Why does the air from my vents smell musty?
Will the mold come back after the system is cleaned?
Will the county health department inspect mold in my ducts?
More mold services in Tyrone
HVAC & Air Duct Mold Removal nearby
Helpful guides
Sources
- EPA: Mold Cleanup in Your Home
- EPA: A Brief Guide to Mold, Moisture and Your Home
- EPA: Should You Have the Air Ducts in Your Home Cleaned?
- Angi: Mold Remediation Cost in Atlanta, GA
- HomeGuide: Mold Removal Cost (2026)
- Town of Tyrone: Building Department
- Town of Tyrone: Code Enforcement
- Georgia DPH: District Office Directory and Map (pdf)
- Georgia DPH: Indoor Air Quality/Mold
- Tyrone, Georgia (Wikipedia)
Last updated: